AKW – SmartCare Lever – Electric Shower with Standard or Care Kit (8.5 / 9.5kW) (White / Chrome)

Standard: AKW SmartCare White with silver/white kit including 2m anti-kink smooth hose, 1m riser rail and easy adjust shower head

Care Kit: 1 x AKW SmartCare Lever White with Care Accessory kit including 2m anti-kink hose, 150kg load-bearing rail and easy adjust shower head

ALL INSTALLATION MANUALS AND SPEC SHEETS ARE AVAILABLE HERE (AKW Manufacturers site)

SPEC FOR CARE KIT OPTION

Plumbing Supply
Supply Source: Mains pressure cold water only
Minimum Dynamic Pressure: 50kPa (0.5 Bar)
Maximum Static Pressure: 1000kPa (10 Bar)
Optimal Minimum Dynamic Pressure: 100kPa (1 Bar) (Recommended to ensure high performance)
Maximum Inlet Temperature: 28°C
Minimum Inlet Temperature: 2°C
Inlet Connection: 15mm pipe
Outlet Connection: 1/2” BSP Male Thread Fitting
Water Ingress Rating: IPX4
Shower Drain Pump Connections: Suitable for AKW M Series (Internal flow sensor or wireless)

Electricity Supply
Nominal Rating at 240 V: 9.5kW & 8.5kW
Supply Fuse / Circuit Breaker: (9.5kW 40/45A) & (8.5kW 35/40A)
Residual Current Device (RCD): 30 mA (must be fitted)
Supply Cable: Refer to current wiring regulations and BS 7671 to determine minimum cable size. No larger than 10mm2
Isolation Switch (e.g. Pull Cord): 45 Amp Double pole
Water and Cable Entry Points: Top, bottom or back

Physical
Height (H): 380mm
Width (W): 230mm
Depth (D): 85mm
Footprint Height (H2): 345mm
Footprint Width (W2): 210mm
Water and Cable Entry Points: Top, bottom or back
Shower Drain Pump Connections: Suitable for AKW M Series (flow sensor or wireless), D4 (Flow Sensor) or AKW A4 (Flow Switch)

SPECS FOR STANDARD OPTION

8 electrical/8 water entry points
Dual power blocks for left or right hand wiring
Plumbing Supply
Supply Source: Mains pressure cold water only
Minimum Dynamic Pressure: 50kPa (0.5 Bar)
Maximum Static Pressure: 1000kPa (10 Bar)
Optimal Minimum Dynamic Pressure: 100kPa (1 Bar) (Recommended to ensure high performance)
Maximum Inlet Temperature: 28°C
Minimum Inlet Temperature: 2°C
Inlet Connection: 15mm pipe
Outlet Connection: 1/2” BSP Male Thread Fitting
Water Ingress Rating: IPX4
Shower Drain Pump Connections: Suitable for AKW M Series (Internal flow sensor or wireless)

Electricity Supply
Nominal Rating at 240 V: 9.5kW & 8.5kW
Supply Fuse / Circuit Breaker: (9.5kW 40/45A) & (8.5kW 35/40A)
Residual Current Device (RCD): 30 mA (must be fitted)
Supply Cable: Refer to current wiring regulations and BS 7671 to determine minimum cable size. No larger than 10mm2
Isolation Switch (e.g. Pull Cord): 45 Amp Double pole
Water and Cable Entry Points: Top, bottom or back

Physical
Height (H): 380mm
Width (W): 230mm
Depth (D): 85mm
Footprint Height (H2): 345mm
Footprint Width (W2): 210mm
Water and Cable Entry Points: Top, bottom or back
Shower Drain Pump Connections: Suitable for AKW M Series (flow sensor or wireless), D4 (Flow Sensor) or AKW A4 (Flow Switch)